When PictBridge Printing Does Not Work
Problem Causes Solutions
PictBridge is not available. There is a problem with the
USB connection or the
PictBridge settings.
Use the following procedure to check
the connection and settings:
1. Disconnect, and then reconnect
the USB cable.
2. Check that the PictBridge settings
are enabled.
3. Disconnect the USB cable, and
then turn off the printer. Turn the
printer back on. When the printer
has fully booted up, reconnect the
USB cable.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
You have connected multiple
digital cameras.
Connect only one digital camera. Do
not connect multiple cameras.
Printing is disabled. The number of originals
exceeds the maximum
number of pages that can be
printed at a time.
The maximum specifiable print quantity
at a time is 999. Respecify the quantity
to 999 or less, and then retry printing.
Printing is disabled. There is no paper of the
specified size remaining.
There is no paper of the specified size
remaining.
If you have to use paper that is not of
the specified size, perform Form Feed.
To cancel printing, perform Job
Cancel.
Printing is disabled. The paper size setting for this
tray cannot be printed on
the printer.
Select the paper size setting that can
be printed on the printer.
3. Troubleshooting
84
To Next Page
Loading...
Need help?
General
Weight and Dimensions
