Ricoh THETA SC2 User Manual

RICOH THETA SC2 - User Guide
update_01.pdf[2019/11/12 16:08:39]
Top
>
Updating the Camera
Firmware
>
Updating the Camera
Firmware Using a Computer
Updating the Camera Firmware Using a Computer
The camera firmware can be updated using the basic app for computer.
The app is required to update the firmware. Download the app from the following site.
https://support.theta360.com/en/download/
1. Start the basic app for computer.
2. Select [File] → [Firmware Update] in the menu.
3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.
4. Select [To next].
5. Check the current version and available version, and select [To next].
The firmware file transfer starts.
6. When “Transfer Done” is displayed, follow the instructions on the screen to update the firmware on the
device.
Caution
Fully insert the USB cable when connecting it.
Do not disconnect the camera from the computer during the firmware file transfer.
and flash alternately on the OLED panel of the camera during the firmware update.
← Back
▲ Back to Top
© 2019 Ricoh Company, Ltd. All Rights Reserved.
Note

Ricoh THETA SC2 Specifications

General

Sensor type	CMOS
Total megapixels	24 MP
Optical sensor size	1/2.3 \
Effective megapixels (image)	12 MP
Wi-Fi	Yes
Product color	Blue
White balance	Auto, Cloudy, Daylight, Natural, Outdoor, Shade, Underwater
ISO sensitivity	64, 3200
Wi-Fi frequency	2.4 GHz
Camera interface	Micro-USB
Country of origin	Japan
Video resolutions	1920 x 960, 3840 x 2160 pixels
Maximum frame rate	30 fps
Number of microphones	1
Video formats supported	H.264, MP4, MPEG4
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG
Maximum image resolution	5376 x 2688 pixels
Still image resolution(s)	5376 x 2688
Storage media	Internal memory
Power source	Battery
Virtual Reality (VR) ready	No

Weight and Dimensions

Depth	100 mm
Width	180 mm
Height	70 mm
Weight	275 g