Need help?Do you have a question about the Ricoma EM-1010 and is the answer not in the manual?
General| Needle Count | 10 |
|---|---|
| Stitch Speed | 1000 SPM |
| USB Port | Yes |
| Built-in Designs | Yes |
| Type | Embroidery Machine |
| Voltage | 110V/220V |
Instructions for assembling the optional stand for the embroidery machine.
Identifies and labels the parts visible from the front of the embroidery machine.
Step-by-step guide on correctly inserting a bobbin into its case.
Discusses characteristics of cotton thread for bobbins.
Discusses characteristics of nylon thread for bobbins.
Details properties of continuous filament polyester for bobbins.
Information on Magna glide bobbins and their magnetic properties.
Comprehensive guide on threading the embroidery machine's top thread path.
Details the use and characteristics of cut-away backing for stabilizing fabrics.
Describes specialty backing materials like poly mesh and their specific uses.
Explains the use and benefits of fusible backing for creating a unified layer.
Step-by-step instructions for powering up the embroidery machine.
Procedures for safely shutting down and disconnecting the embroidery machine.
Details on how to start and stop embroidery jobs using the control panel.
Instructions on choosing and setting the correct embroidery hoop for a design.
Information on using the needle switch display for manual machine head movement.
Explains the float mode for fast-forwarding or rewinding designs.
Confirms the design is properly positioned by tracing its area.
Instructions on how to add custom fonts to embroidery designs.
Guide on incrementally adjusting the embroidery machine's operational speed.
Steps for installing the flat frame support onto the embroidery machine.
Guide on how to detach the flat frame support from the machine.
Steps for installing the cap driver onto the embroidery machine.
Guide on how to attach a cap to the embroidery hoop.
Procedure for detaching the cap driver from the embroidery machine.
How to inspect and verify the correct thread tension settings.
Specific methods for adjusting top thread tension for optimal results.
Identifies the different parts of an embroidery needle.
Factors determining the lifespan of an embroidery needle.
Signs indicating that a needle needs to be replaced.
Explanation of needle blade sizes and their corresponding applications.
Instructions for lubricating and maintaining the machine's rotary hook.
Maintenance procedures for the embroidery machine's head assembly.
Lubrication instructions for the machine's level arms.
Explains causes and solutions for thread breakage during embroidery.
Troubleshooting steps for issues related to bobbin rotation and tension.
Specific error message for thread breaks and recovery steps.
Addresses needle break errors and their resolution.
To Next Page
