32DSSP01.A
2-8
1. ENTERING VEHICLE:
a. DEPLOY PLATFORM - Push and hold DEPLOY switch until platform com-
pletely unfolds from vehicle and stops at floor level.
b. LOWER PLATFORM - DO NOT STAND on inboard rollstop as platform lowers.
Push and hold DOWN switch until lift contacts ground and rollstop opens
completely.
1) Carefully place wheelchair centrally on platform, fac-
ing outward away from vehicle, and LOCK WHEEL-
CHAIR BRAKES.
2) Be certain wheelchair is safely within platform perime-
ter and does not interfere with operation of platform
rollstop.
c. RAISE PLATFORM - Push and hold UP switch until platform raises and stops
automatically at vehicle floor level.
♦ Release wheelchair brakes, carefully board passenger into vehicle, and
secure wheelchair.
d. Refer to “stowing platform” section below to stow platform.
2. EXITING VEHICLE:
a. DEPLOY PLATFORM - Push and hold DEPLOY switch until platform com-
pletely unfolds from vehicle and stops at floor level.
1) Be certain platform is safely at vehicle floor level and
platform rollstop is in an up and locked position.
2) Carefully place wheelchair centrally on platform, facing
outward away from vehicle, and LOCK WHEELCHAIR
BRAKES.
b. LOWER PLATFORM - DO NOT STAND on inboard rollstop as platform lowers.
Push and hold DOWN switch until platform settles at ground level. Carefully
exit platform.
c. RAISE PLATFORM - Push and hold UP switch until platform rises to vehicle
floor level.
d. Refer to “stowing platform” section below to stow platform.
To Next Page
Loading...
Need help?
General
