To Next PageTo Next Page
Need help?Do you have a question about the Riden RD6018 and is the answer not in the manual?
Instructions for using UniSoft's RDFlasher utility on Windows for firmware installation.
Guide on using Timo Kokkonen's Riden flashtool for firmware installation on various OS.
Instructions on how to adjust the calibration settings using the Riden Power Supply Software.
Addresses a hardware bug causing output surge and provides a fix.
Detailed instructions on how to resolve the output surge problem by replacing a resistor.
Step-by-step guide to connect the RD60xx to WiFi for the first time using Smart Config.
Overview of different battery types and chemistries supported for charging.
Procedure for correctly connecting a battery to the RD60xx for charging.
Details on configuring battery charging settings like V-SET and I-SET.
Explanation of various charging strategies and how to configure them.
General| Output Voltage Range | 0-60V |
|---|---|
| Output Current Range | 0-18A |
| Output Power | 1080W |
| Voltage Resolution | 0.01V |
| Capacity Measurement | Yes |
| Energy Measurement | Yes |
| Cooling | Fan |
| Protections | Over voltage, over current, over temperature, short circuit |
| Weight | 2.5 kg |
| Display Type | LCD |
| Communication Interface | USB/Bluetooth |
| Current Resolution | 0.001A |
| Operating Temperature | -10℃~40℃ |
