9
Installing App & Linking Android
1. Select the Play Store Icon on
your screen.
2. Using the search feature, type in
ridetech. There will be a list that
pops up of di erent names, select
the Ridetech RidePro X-HP.
3. Touch the INSTALL button to
download the RidePro X-HP app to
your phone.
4. After the App loads, open it by
touching it on your screen.
The RidePro X-HP needs to be installed and
powered up to complete the following steps.
5. Select the Settings Icon on your phone screen.
6. Turn the Bluetooth On if it is o . The switch will
be blue. If it is not blue, slide the switch to the right
turning it blue.
7. Open the Ridetech App on your phone.
When you open the App for the rst time “Allow
Ridetech to access this device’s location” will pop
up, select either choice. We do not monitor the
device location.
8. After making your choice for the Location
Service, you should see Image 8. If you do not see
it, make sure the WCU is plugged in and the system
is turned on.
9. The WCU can have either a Small Hole or Button
beside the plug. The button is ush with the case,
but can be pushed with your nger. If it has the
small hole, nd something small enough to t the
hole. We use a paperclip that has been straightened
out. Peel o the “CAUTION - Excessive Force May
Cause Button Failure” Decal to expose the hole.
10. If the WCU has the button, use your nger
to push the button until you fell it click. If it has
the small hole, insert the paperclip straight in the
hole. Push straight in LIGHTLY, until you feel a
click through the paperclip. You do NOT need to
use a lot of pressure to push the button. Excessive
pressure will damage the unit. The Green Light
on top of the ECU will start ashing rapidly. The
Green Light will ash rapidly for 12 seconds.
11. Touch the RT#### (this number is unit speci c and will vary) number that is displayed.
This must be done while the Green light is ashing rapidly. It ashes rapidly for 12
seconds.
12. Once it is linked, you will see the Main Screen and the green light will go solid when
the unit is paired with your phone.
Installing App & Linking Android
1. 2. 3. 4.
5. 6.
7.
8.
11.
3.
9.
10.