To Next PageTo Next Page
Need help?Do you have a question about the RIDGID 918 Series and is the answer not in the manual?
Safety precautions for maintaining a clean and hazard-free work environment.
Essential electrical safety practices to prevent shock and fire hazards.
Guidelines for operator safety, including dress code and awareness.
Critical safety warnings and operational rules specific to the 918 Roll Groover.
Overview of the RIDGID 918 Heavy Duty Roll Groover's design and function.
Technical details, capacities, and measurements for the groover.
List of components and items included with the basic 918 Roll Groover.
Identification of different model numbers and their configurations.
Preliminary assembly steps for the 918-2 before machine mounting.
Procedure for attaching to an 1822 machine with a 1406 stand.
Guide for mounting on an 1822 with alternative stand models.
Preliminary assembly steps for the 918-4 before machine mounting.
Procedure for attaching the 918-4 model to a 1224 Threading Machine.
Preliminary assembly steps for the 918-5 before machine mounting.
Procedure for attaching the 918-5 model to a 535 machine.
Essential steps for preparing pipe ends before the grooving process.
Guidelines on supported pipe lengths and required pipe stands.
How to correctly position and align the pipe for grooving.
Procedure to remove and install roll sets for solid drive shafts (2-6, 8-12 inches).
Step-by-step guide to remove the groove rolls from the shaft assembly.
Procedure to safely detach the solid drive shaft.
Procedure for installing a new solid drive shaft and securing it.
Steps for properly fitting and securing the groove roll onto the shaft.
Steps to mount the pipe stabilizer/nipple bracket onto the groover.
How to adjust and use the pipe stabilizer for proper support.
Procedure for checking and maintaining the correct hydraulic fluid level.
Schedule and method for lubricating key components of the groover.
Guidelines for proper storage of the roll groover to prevent damage.
Specifies the types of defects and materials covered by the warranty.
Defines the duration and conditions for warranty coverage.
Instructions for submitting a product for warranty service.
Outlines the company's actions for warranty claims (repair, replace, refund).
Lists exclusions from the warranty, such as misuse or normal wear.
Explains how state or local laws may affect warranty rights.
States that the written warranty is the only one provided.
General
