RIDGID 920 User Manual

WARNING!
Read this Operator’s Manual
carefully before using this tool.
Failure to understand and fol-
low the contents of this manu-
al may result in electrical
shock, fire and/or serious per-
sonal injury.
Roll Groover
OPERATOR’S
MANUAL
920
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

RIDGID 920 Specifications

General

Brand	RIDGID
Model	920
Category	Power Tool
Language	English

Summary

General Safety Information

Electrical Safety

Critical precautions for safe use of electrical components and avoiding shock.

Personal Safety

Specific Safety Information

Roll Groover Safety

Key safety rules and best practices for operating the Roll Groover safely.

Description, Specifications, and Standard Equipment

Specifications

Machine and Work Area Set-Up

Installing the Groover on the 300 Power Drive

Step-by-step guide for mounting the Roll Groover onto the power drive.

Machine Inspection and Set-Up

Inspecting 920 Groover

Machine Set-Up

Operating the 920 Roll Groover

Pipe Preparation

Steps for preparing pipe ends before grooving.

Pipe Set-Up

Roll Guards

Adjusting Roll Groove Depth

Process for setting the correct groove depth using the gauge.

Forming the Roll Groove

Detailed steps for creating the pipe groove using the machine.

Removing and Installing Groove Roll Sets

Removing Groover From 300 Power Drive

Service and Repair

Troubleshooting