Need help?Do you have a question about the RIDGID MegaPress and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Tool Type | Press Tool |
| Compatible Materials | Copper, stainless steel |
| Power Source | Battery-powered |
| Operating Temperature Range | 140°F (60°C) |
| Compatible Pipe Sizes | 1/2" - 2" |
Explains signal words and symbols used in the manual and on the product for hazard communication.
Provides essential safety guidelines to follow for safe tool operation and to prevent injury.
Details safety precautions specific to the MegaPress Press-In Branch Connector Installation Kit.
Steps to inspect the kit components before use to ensure safety and proper function.
Comprehensive guide for setting up and operating the MegaPress Press-In Branch Connector Installation Kit.
Detailed instructions on how to correctly mount and position the drill guide on the pipe.
Step-by-step process for cutting the required hole in the pipe using the kit.
Procedure for pressing the fitting into the prepared pipe using the installed tool.
To Next Page
