RP 115 Press Tool
ii
999-995-408.10_REV. A
Table of Contents
Safety Symbols .................................................................................................... 2
General Power Tool Safety Warnings*
Work Area Safety .............................................................................................. 2
Electrical Safety ................................................................................................ 2
Personal Safety .................................................................................................3
Power Tool Use And Care .................................................................................3
Battery Tool Use And Care ................................................................................ 4
Service .............................................................................................................. 4
Specific Safety Information
Press Tool Safety .............................................................................................. 4
RIDGID
®
Contact Information .............................................................................. 5
Description ........................................................................................................... 5
Specifications ......................................................................................................6
Standard Equipment ......................................................................................... 7
Pre-Operation Inspection .................................................................................... 7
Set-Up and Operation ..........................................................................................8
Removing/Installing Attachment ........................................................................ 8
Preparing Connection ....................................................................................... 9
Pressing A Fitting .............................................................................................. 9
Inspecting The Pressed Connection ............................................................... 10
Work Light Disable/Enable .............................................................................. 10
Storage ............................................................................................................... 10
Maintenance Instructions
Cleaning And Lubrication ................................................................................ 10
Pressing Attachments ..................................................................................... 11
Required Maintenance At RIDGID Authorized Independent Service Center ..... 11
Troubleshooting...........................................................................................11- 12
Service And Repair ......................................................................................... 12
Optional Equipment
Jaws ................................................................................................................ 12
Battery Pack .................................................................................................... 12
Chargers and Cords ........................................................................................ 13
Disposal .............................................................................................................. 13
Clearance Requirements ................................................................................... 13
Electromagnetic Compatibility (EMC) ............................................................. 14
FCC/ICES Statement ................................................................ Inside Back Cover
EC Declaration of Conformity .................................................. Inside Back Cover
Lifetime Warranty .................................................................................Back Cover
*Original Instructions - English
To Next Page
General
