To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R4120 and is the answer not in the manual?
General| Motor Power | 15 Amp |
|---|---|
| Voltage | 120V |
| Bevel Capacity | 0-45 degrees |
| Blade Diameter | 10 in |
| Max Cut Depth at 45 Degrees | 2-1/2 in. |
| Table Size | 20-1/2 x 26-1/2 inch |
| Arbor Size | 5/8 inch |
| Depth of Cut at 45 degrees | 2-1/2 in. |
Explains double insulation in electric power tools for shock protection.
Details connecting the tool to a 120V AC, 60Hz power supply.
Guidelines for selecting and using extension cords for power tools.
Technical specifications of the compound miter saw, including dimensions and capacity.
Understanding the tool's operation, features, and safety rules before use.
Details about the laser guide for accurate cutting.
How to use the trigger and lock the switch for safety.
Steps for safely unpacking the miter saw and securely mounting it.
Instructions for installing the blade and aligning saw for accurate cuts.
Details on adjusting miter lock, blade squaring, and pivot points.
Instructions for performing miter, cross, and bevel cuts on the workpiece.
Guidance for compound cuts, crown molding, and warped material.
Methods for supporting long and wide workpieces during cutting operations.
Procedure for adjusting the laser guide for precise cutting alignment.
Steps for checking and replacing worn carbon brushes in the motor.
Instructions for replacing the batteries in the laser guide.
Details of the 3-year limited service warranty for the tool.
Guidance on how to get the tool serviced or repaired under warranty.
Lists exclusions, disclaimers, and limitations of the warranty.
