RIDGID R4520 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
10 in. TABLE SAW
SCIE À TABLE de 254 mm (10 po)
SIERRA DE MESA de 254 mm (10 pulg.)
R4520/R4520T
Cette scie a été conçue et fabriquée conformément aux strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenu, cet outil vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur
doit lire et veiller à bien comprendre le manuel
d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender el manual del operador antes de
usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com

RIDGID R4520 Specifications

General

Type	Table Saw
Blade Diameter	10 inches
Motor	15 Amp
Power Source	Corded Electric
Max RPM	5000 RPM
No Load Speed	5000 RPM
Electric Brake	Yes
Arbor Size	5/8 inches
Max Cut Depth @ 90 Degrees	3-1/2 inches
Dust Port	2-1/2 inches
Warranty	3 years limited

Summary

Introduction

Safety Rules

General Safety Guidelines

Essential safety guidelines for operating power tools, covering work area, electrical, personal safety, and tool use.

Table Saw Specific Safety

Safety precautions unique to table saw operation, including blade guard, riving knife, and cutting procedures.

Kickback Prevention

Understanding and avoiding sudden workpiece recoil through proper techniques and equipment use.

Features

Product Specifications

Technical details and performance parameters of the table saw, including blade size and speed.

Know Your Table Saw

Familiarization with tool parts, accessory storage, and operational features.

Assembly

Unpacking and Initial Checks

Procedures for safely removing the saw from its packaging and performing initial inspections.

Installing Major Components

Step-by-step instructions for attaching handwheels, leg stand, rails, and blade.

Operation

Avoiding Kickback

Techniques to prevent dangerous workpiece recoil by maintaining proper alignment and usage.

Performing Common Cuts

Procedures for performing cross, rip, miter, bevel, and compound cuts on the saw.

Using Cutting Aids

Information on using push sticks, blocks, and featherboards for safer operation.

Adjustments

Setting Blade Angles

Adjusting the blade to 0° and 45° for accurate bevel and cross cuts.

Aligning Rip Fence and Blade

Ensuring the rip fence is parallel to the blade for precise rip cuts.

Maintenance

General Cleaning and Lubrication

Routine cleaning, lubrication, and belt care procedures for the saw.

Troubleshooting

Common Problems and Solutions

Diagnosing and resolving issues like vibration, binding, or fence movement.

Warranty