RIDGID R4510 User Manual

Your table saw has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this
product.
Thank you for buying a RIDGID® product.
OPERATOR’S MANUAL
10 in. TABLE SAW
R4510 / R45101
SAVE THIS MANUAL FOR FUTURE REFERENCE

RIDGID R4510 Specifications

General

Motor Power	15 Amp
Blade Diameter	10 inches
Max Cutting Depth at 90°	3-1/8 inches
Max Cutting Depth at 45°	2-1/4 inches
Arbor Size	5/8 inches
Table Material	Aluminum
Bevel Capacity	0° - 45°
Table Size	20 x 27 inches

Summary

General Safety Rules

Specific Safety Rules

Electrical Specifications and Safety

Features and Components Overview

Switch Assembly

Assembly Process

Mounting the Saw and Leg Stand

Instructions for assembling the leg stand and mounting the saw base.

Leg Stand Operation and Storage

Blade, Guards, and Riving Knife Setup

Table Saw Operation Guide

Basic Operation, Safety, and Kickback Prevention

Essential information on table saw operation, safety, and kickback prevention.

Performing Different Cut Types

Instructions for various cuts including cross, rip, miter, bevel, dado, and panel cuts.

Adjustments and Blade Replacement

Replacing the Saw Blade

Step-by-step guide for safely removing and installing a new saw blade.

Setting Bevel Indicator and Stops

Rip Fence Alignment

Maintenance and Accessories

Troubleshooting Common Issues

Troubleshooting Vibration, Fence, Binding, Burning

Solutions for common problems like excess vibration, fence issues, binding, or burning work.

Troubleshooting Start, Cut Quality, Motor

Solutions for issues with the saw not starting, poor cut quality, or motor problems.

Warranty Information