To Next PageTo Next PageWhat to do if my RIDGID R4560 Saw fails to start?
If your RIDGID Saw fails to start, first ensure that the prongs on the cord plug are making good contact in the receptacle. Next, check the reset button on the power switch housing. Finally, inspect your power line for blown fuses or open circuit breakers.
Defines safety symbols and their meanings for user understanding and tool operation.
Provides essential safety guidelines applicable to all power tools.
Outlines safety rules specifically for table saw operations and hazards.
Guidance on selecting and using appropriate extension cords for the table saw.
Lists all components included in the saw's packaging.
Details the contents of various hardware bags for assembly.
Instructions for assembling the saw's stand and legs.
Procedure for attaching wheels and adjustable feet to the saw stand.
Steps for attaching the front and rear fence rails to the saw table.
Procedure to ensure the riving knife is correctly aligned with the saw blade.
Instructions for calibrating the miter gauge's angle indicator.
Steps to make the rip fence perfectly parallel to the miter gauge slot.
Guide on adjusting the saw blade height relative to the workpiece.
Instructions for setting the blade angle for bevel cuts.
Procedure for safely replacing the table saw blade.
Details on how to safely turn the saw on and off.
Explanation of the motor's overload protection feature and reset procedure.
Step-by-step guide for performing rip cuts on the table saw.
Information on using and constructing a push stick for safety.
Guide to adding auxiliary facing to the rip fence for special cuts.
Instructions for using the flip-down feature of the fence.
Recommendations for cleaning the saw's components and air passages.
Guidance on lubricating moving parts and protecting surfaces.
Procedure for checking and adjusting the drive belt tension.
Troubleshooting steps for when the saw fails to start.
Details of the manufacturer's limited warranty coverage.
Instructions on how to contact customer service for repairs or support.
Exclusions and limitations of the product's warranty.
General
