RIDGID R4514 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
10 in. TABLE SAW
SCIE À TABLE de 254 mm (10 po)
SIERRA DE MESA de 254 mm (10 pulg.)
R4514
Cette scie a été conçue et fabriquée conformément aux strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenu, cet outil vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur
doit lire et veiller à bien comprendre le manuel
d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com

RIDGID R4514 Specifications

General

Brand	RIDGID
Model	R4514
Category	Saw
Language	English

Summary

General Safety Rules

Table Saw Safety Rules

Blade Guard, Riving Knife, and Anti-Kickback Pawls

Describes the importance of keeping guards in place, their proper mounting, and function to reduce injury risk.

Cutting Procedures Safety

Details safe practices for feeding workpieces, using guides, and avoiding contact with the blade during cuts.

Kickback Hazards and Prevention

Explains kickback as a sudden workpiece reaction due to blade binding, and lists its causes and avoidance methods.

Table Saw Operation Safety

Electrical Safety and Connections

Features and Specifications

Operating Controls and Features

Assembly

Assembling the Leg Stand

Step-by-step guide for assembling the leg stand, including attaching handles, center brace, and inner leg assembly.

Completing Leg Stand Assembly

Mounting Saw to Leg Stand

Procedure for securely mounting the table saw base onto the assembled leg stand using provided hardware.

Riving Knife Position Adjustment

Installing Anti-Kickback Pawls and Blade Guard

Aligning Riving Knife and Saw Blade

Procedure to check and adjust the horizontal and vertical alignment of the riving knife with the saw blade.

Operation

Kickback Hazards and Prevention

Explains kickback causes like blade binding and twisting wood, and methods to avoid it for safe operation.

Using Cutting Aids (Push Sticks, Blocks)

Guidance on making and using push sticks and push blocks to safely feed workpieces through the saw blade.

Workpiece Support and Auxiliary Fence

Using Featherboards

Adjusting Blade Depth and Angle

Procedures for setting the saw blade depth and adjusting the blade angle for bevel cuts.

Using and Adjusting the Rip Fence

Instructions on how to use the rip fence for precise rip cuts and set the rip fence scale indicator.

Using Miter Gauge and Table Extension

Making a Cross Cut

Step-by-step instructions for performing a standard cross cut using the miter gauge for guidance.

Repetitive Cross Cuts and Rip Cuts

Guidance on making repetitive cross cuts using a stop block and basic rip cut procedures.

Making Narrow Rip Cuts

Making Miter and Bevel Cross Cuts

Making Bevel Rip Cuts

Making Compound (Bevel) Miter Cuts

Making Large Panel Cuts

Making Non-Through Cuts

Making Dado Cuts

Adjustments

Replacing the Saw Blade

Detailed steps for safely removing and installing a new or different saw blade, including necessary precautions.

Setting Bevel Indicator and Stops

Adjusting the Miter Gauge

Checking Rip Fence Alignment

Procedure to ensure the rip fence is parallel to the saw blade and miter gauge grooves for safe and accurate cuts.

Low Fence Alignment

Maintenance

General Maintenance and Cleaning

Brush Replacement

Troubleshooting