To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R840011 and is the answer not in the manual?
Keep work area clean and well lit, away from flammable atmospheres and distractions. Use correct charger and battery pack.
Stay alert, dress properly, avoid accidental starting. Secure workpiece, use correct tool, do not force.
Tool service must be performed only by qualified repair personnel.
Use auxiliary handles, hold insulated surfaces, wait for cutter to stop, know your tool.
Follow all instructions, use correct charger/battery, avoid wet conditions, use attachments carefully.
Use proper extension cord if necessary, ensure correct wiring and gauge.
Save instructions, read cautionary markings, charge only Ni-Cd batteries.
Symbols for Volts, Amperes, Hertz, Watt, time, AC/DC, No Load Speed, Per Minute.
Symbols for Class II Construction, Wet Conditions, Read Manual, Eye Protection, Safety Alert, No Hands, Hot Surface.
DANGER, WARNING, CAUTION indicate different levels of risk and potential injury.
Servicing by qualified personnel; wear safety goggles for eye protection.
Keyless Chuck (1/2 in.), 18 Volt DC Motor, Variable Speed Switch, 2 Speed Gear Train.
24-position Clutch, Charger Input (120V AC), Charge Rate (20 min), Torque 460 in.lb.
Auxiliary handle, bit storage, charger hanging, and rotation selector descriptions.
Product shipped assembled; check packing list for included items.
Safety advice for tool use and list of applications like drilling and mixing.
Instructions for charging hot, cool, and normal battery packs.
Explains Power, Evaluate, and Charging indicators on the charger.
Chart showing charge times for different battery models.
Steps for attaching and detaching the battery pack from the drill.
How to turn the drill on/off and control speed with the trigger.
Controls for forward/reverse rotation and how to tighten/release bits.
Selecting between LO (1) for torque and HI (2) for speed.
Using the 24-position clutch for different screw types and materials.
Location for bits and procedure for inserting them into the chuck.
Steps to unlock the chuck jaws and remove the drill bit.
Adjusting and positioning the auxiliary handle for better control.
Steps for drilling, warnings about binding, and handling jams.
Using oil for metals and understanding the electric brake.
Cleaning, avoiding solvents, and general safety precautions during maintenance.
Proper care, storage, and disposal of Ni-Cd batteries.
Steps for removing and installing the drill chuck.
Procedure to address a wobbly or binding chuck.
Details on 3-year warranty and 90-day satisfaction policy.
How to get service and what the warranty covers/excludes.
Contact nearest RIDGID authorized service center for parts/service.
Record Model No. R840011 and Serial No. for repair parts.
General
