AC9940 Specifi cations Features Includes Weight
24603 • Quick Set-Up – jobsite ready in seconds Miter saw stand, mounting hardware Tool Weight: 92 lbs.
Miter Saw Support-MSUV • Folds Up Easily – with miter saw attached for two wheel transportation and operator’s manual
and upright storage
• Wide Base with Non-Skid Feet – for stability during use
• Heavy Duty – welded steel construction, built job-site tough
• Large Rubber Wheels – provide superior mobility over rough terrain
• Extra Wide Steel Rollers – adjust to over 8' for maximum workpiece support
• Fits Most Miter Saws – mounting holes provided for RIDGID® models
• Quick and Easy Assembly – merely mount wheels and roller supports
TP1300LS Specifi cations Features Includes Weight
14673 Input: 15 Amp, 120V • 15 Amp/120V Motor with Overload Protection Thickness planer, blade changing tools, Tool Weight: 85 lbs.
13" Thickness Planer Cutterhead Speed: 9,000 RPM • 13" x 6" Cutting Capacity blade storage case, extra set of dual edge
(no load) • Snipe Reduction with Sure-Cut Lock
Cuts Per Minute: 18,000 • Super Fine Finish with 66 Cuts per Inch
(no load) • Dual-Edge, Quick Change Knives
Feed Rate: 26 FPM (no load) • Ind-I-Cut™ Depth Measurement – instantly measures cutting depth
Capacity: 13" x 6" before each pass
Max. Depth-of-Cut: 1/8" • Repeat-A-Cut™ Depth Stops – eight adjustable depth stops to precisely
plane workpieces to desired thickness up to 1 3/4" thick
• Cord Wrap – keeps cord out of the way when planer is not in use
• On-Board Tool and Knife Storage – keeps blades and blade changing tools
conveniently stored for quick and easy access
• Sof-Touch™ Controls – ergonomic knobs are comfortable and user-friendly
• Large Infeed/Outfeed Tables – extra support for large workpieces
• Upper and Lower Sof-Touch™ Carrying Handles – cushioned, conveniently-placed
carry handles help make planer easier to transport and store
TS2400LS Specifi cations Features Includes Weight
14648 Input: 15 Amp 120V • “T" Slot Miter Gauge and Slots – provide additional accuracy for Table saw, Work-N-Haul It™ cart, carbide Tool Weight: 122 lbs.
10" Portable Table No Load Speed: 4,000 RPM • Quick Change Blade Guard – easily removed or replaced without tools* tooth blade, rip fence, miter gauge, wrenches
Blade Diameter: 10" • Retract-A-Rip™ Fence and Rail – maintains rip dimension accuracy and operator’s manual
Depth-of-Cut @ 45°: 2 1/4" to the blade, provides 25" rip capacity while maintaining portability
Depth-of-Cut @ 90°: 3 1/8" • Includes Work-N-Haul It™ Table Saw Cart – folds easily for transport.
Rip Capacity: 25" right of Unfolds to a convenient, sturdy saw platform
blade; 12" left of blade • Single Handle Bevel/Height Adjustment – for quick, easy blade adjustments
• 15 Amp Motor – heavy duty power with soft start and overload reset
• On-Board Storage – keeps rip fence, miter gauge, extra blades and power cord
within easy reach
TS3650 Specifi cations Features Includes Weight
14633 Input: TEFC 13/6.5 Amp • Toolless Blade Guard – can be easily removed or replaced* Base, miter gauge, carbide tipped manual Tool Weight: 287 lbs.
10" Cast Iron Table Saw Blade Diameter: 10" • 40 Tooth Carbide Blade – for fast ripping and smooth crosscuts and rail set
Depth-of-Cut @ 45°: 2 1/4" • Ind-I-Cut™ Alignment Disc – accurately aligns cut line with blade
Depth-of-Cut @ 90°: 3 3/8" • Rugged and Precise Rip Fence Design with Micro-Adjust – 36" rip
Rip Capacity: 36" right of blade; capacity for ripping wider material
12" left of blade • Up Front Controls – for easier access
No Load Speeds: 3,450 RPM • Herc-U-LiftTM Mobile Base – for easy transportation
• TEFC (Totally Enclosed Fan Cooled) Motor™ – keeps dust and debris out
of motor to extend life
• Cast Iron Extensions with Clamping Surface – allow jigs and featherboards
to be clamped in place easily
Pneumatic
R150FSA Specifi cations Features Includes Weight
21183 Fastener Type: narrow crown • Powerful Oil-Less Motor – eliminates daily oiling and splattering R150FSA Finish Stapler, case, 1,000 staples, Tool Weight: 2.6 lbs.
1 1/2" Finish Stapler Fastener Diameter: 18 gauge on work surfaces 2 no-mar pads (on tool), eye protection, 2 wrenches
Staple Crown: 1/4" • Dry-Fire Lockout – to extend motor life and prevent marring work and operator’s manual
Fastener Range: 3/8" – 1 1/2" surfaces with dry-fi res
Magazine Capacity: 110 staples • Tool-Free Adjustable Exhaust with Muffl er – allows you to direct
Length x Height: 9 3/4" x 9 5/8" the exhaust where you want it
• 2 No-Mar Pads (on tool) – to keep work surface clean of tool marks
To Next Page
Loading...
