Need help?Do you have a question about the Riedel Bolero 3.1 and is the answer not in the manual?
General| Number of beltpacks per antenna | 10 |
|---|---|
| Number of antennas per AES67 network | 100 |
| Ingress Protection | IP65 |
| Type | Digital Wireless Intercom |
| Latency | < 4 ms |
| Battery Life | 17 hours |
| Headset Connector | 4-pin XLR |
| Power Supply | Rechargeable Battery |
| Charging Time | < 3 hours |
| Audio Bandwidth | 7 kHz |
| Operating Temperature | -10°C to +50°C |
| Channels | Up to 48 |
Explains hazard symbols and cautionary information related to equipment handling and use.
Details the changes and new features introduced in version 3.1 of the user manual.
Guides on how to check the Bolero system's package version on devices and the web interface.
Provides an overview of the Bolero wireless intercom system, its features, and applications.
Overview of the three operating modes: Standalone/AES67, Standalone/Link, and Integrated/Artist.
Step-by-step instructions for setting up each Bolero system mode.
Instructions for accessing and using the web interface for system configuration and monitoring.
Identifies and describes the physical buttons and controls on the Bolero beltpack.
Explains the meaning of different LED indicators on the Bolero beltpack.
Covers fundamental operations like startup, key functions, and menu navigation.
Details the structure and options available within the beltpack's main menu.
In-depth explanation of features like headset, speaker, Bluetooth, battery, and firmware.
Provides detailed technical data and specifications for the Bolero beltpack.
Identifies and describes the physical controls of the Bolero S-Beltpack.
Explains the various status indicators provided by the LEDs on the S-Beltpack.
Details the beltpack's key functions and battery management.
Identifies and describes the physical controls and ports of the Bolero antenna.
Explains the meaning of the LED indicators on the Bolero antenna.
Covers fundamental antenna operations, main menu, and setup procedures.
Provides detailed technical data for the Bolero antenna.
Identifies and describes the physical controls of the Bolero charger.
Explains status LEDs and the process of charging batteries using the charger.
Instructions for updating the firmware of the Bolero charger.
Provides detailed technical data for the Bolero EPS-1001 power supply.
Explains the power concept and status indicators for the EPS-1005.
Provides detailed technical data for the Bolero EPS-1005 power supply.
Illustrates the physical dimensions and components of the Bolero Drawer.
Provides detailed technical data for the Bolero Drawer.
Defines key terms and acronyms used throughout the Bolero user manual.
Offers recommendations for maintenance and information regarding service procedures.
To Next Page
