Need help?Do you have a question about the Riedel Bolero and is the answer not in the manual?
General| Encryption | AES-256 |
|---|---|
| Type | Wireless Intercom System |
| Frequency Bands | 1.9 GHz |
| Charging Time | 3 hours |
| Protection Class | IP54 |
| Operating Temperature | -10°C to +50°C |
| Connectivity | AES67 |
| Beltpack Capacity per Antenna | 10 beltpacks |
| Network | Ethernet |
| Headset Connector | XLR 4-pin |
| Power | 12 V DC |
| Channel Bandwidth | 1.728 MHz |
| Modulation | GFSK |
| Data Rate | 1152 kbps |
| Power Supply | PoE (Power over Ethernet) |
| Power Consumption | 15 watts |
| Dimensions (Base Station) | 483 x 44 x 280 mm |
| Weight (Base Station) | 3.5 kg |
| Battery Life | Up to 17 hours |
| Operating Range | 300m (line of sight) |
Identifies and describes the physical controls and connectors of the Beltpack.
Guides users through initial setup, core functions, and menu navigation.
Guides users through initial setup, core functions, and menu navigation.
Primary method for configuring and managing the Antenna.
Guides on how to charge Beltpack batteries using the charger.
To Next Page
