Riedel Bolero - Edit

46
Bolero User Manual A20
3.4.1.1 Edit
Clicking the Edit symbol opens a dialog with the following setting. The dialog can be closed by pressing the ESC key
without saving any changes.
Apply
Stores all changes.
Cancel
Discards all changes.
Edit Antenna Settings
Name
Name of the Antenna.
User ID
Unique ID of the Antenna.
Antenna RF
Enabling/Disabling the radio of the Antenna.
IP Address Mode
Selection of the IP address mode (Auto, DHCP, Static).
Static IP Address
*1
Fixed IP address of the Antenna.
Subnet Mask
*1
Fixed subnet mask of the Antenna.
Static Gateway
*1
Fixed Gateway of the Antenna.
PTP Master Priority
Selection of the PTP priority (default: 124).
*1
if IP Address Mode = Static