Riedel Bolero - Features in Detail; Speaker; Brightness Mode

22
Bolero User Manual A20
2.4 Features in Detail
2.4.1 Speaker
In the menu 'Audio > Speaker' is defined, if the audio signal is routed to the internal speaker or to an attached headset.
Connecting a headset will switch the speaker off. Removing a headset won't change the current setting.
The following table shows the usage of the internal and headset microphone:
Speaker Mode: On
Speaker Mode: Off
Headset connected
Beltpack microphone
Headset microphone
no Headset connected
Beltpack microphone
no microphone active
In the speaker mode the echo cancellation is always active.
2.4.2 Brightness Mode
The menu 'Brightness > Brightness-Mode' allows switching between different predefined and one user specified display
settings. Under Brightness > Custom Settings the single parameters can be modified.
The predefined modes have following values:
Element
Description
High
Medium
Low
Display
normal display brightness
100%
60%
20%
Display Dim
dimmed display brightness
50%
20%
10%
Display Dim Timer
inactivity timer to dim the display
Off
20 sec.
5 sec.
Display Off Timer
inactivity timer to turn off the display
Off
Off
1 min.
Keys
normal key brightness
100%
60%
20%
Keys Dim
dimmed key brightness
50%
20%
10%
Keys Dim Timer
inactivity timer to dim the keys
Off
20 sec.
20 sec.
Keys Off Timer
inactivity timer to turn off the keys
Off
Off
5 min.
Call LED Dim
dimmed Call LED brightness
100%
40%
10%
Status LED Dim
dimmed Status LED brightness
100%
60%
10%