Riedel Bolero - Edit

49
Bolero User Manual A20
3.4.2.1 Edit
Clicking the Edit symbol opens a dialog with the following settings. The dialog can be closed by pressing the ESC key
without saving any changes.
The user of the Beltpack has the rights to edit
the respective functions on the Belt Pack itself.
The user of the Beltpack has no rights to edit
the respective functions on the Belt Pack itself.
Apply
Stores all changes.
Cancel
Discards all changes.
Beltpack Properties
General
Profile Name
Name of the Profile.
Profile Id
Unique ID of the Profile.
Headset Type
Auto, Dynamic, Electret
Display Mode
Standard, Big Text, Flip Screen
Silent Mode
Switch to enable the silent mode.
Name
Default Name
Default name of the Beltpack.
Append Id
Switch to use the User Id as Name suffix.
Levels
Headset
Slider to adjust the headset volume.
Sidetone
Slider to adjust the sidetone volume.
Headset Mic Gain
Slider to adjust the gain of the headset microphone.
Internal Mic Gain
Slider to adjust the gain of the internal microphone.
Aux Input Gain
Slider to adjust the gain of the line input.
Limiter Threshold
Slider to adjust the Limiter threshold.
VOX Threshold
Slider to adjust the Vox threshold.
Speaker/Mic
Enable
Switch to enable the internal Beltpack speaker and microphone.
Volume
Slider to adjust the speaker volume.
Signalization
Call
Switch to enable the respective signalization:
· Light
· Vibrate
· Beep
· Voice (only for: Info/Low Battery, Out of Range)
Indication/Beep
Info/Low Battery
Out Of Range
Beep Signalization
Slider to adjust the tone signalization volume.
Voice Signalization
Slider to adjust the voice signalization volume.
Timeout
Timeout volume
Slider to adjust the volume timeout (how long the volume adjustment is opened
without activity).
Timeout menu
Slider to adjust the menu timeout (how long a menu is opened without activity).