Riedel Bolero - Menu

53
Bolero User Manual A20
Brightness (Display, Keys)
Brightness mode
High, Medium, Low, Custom (see Beltpack Brightness Mode)
Brightness
Slider to adjust the normal display/key brightness.
Dimmed
Slider to adjust the dimmed display/key brightness.
Dimm Timer
Slider to adjust the timeout, how fast the display/key illumination is dimmed.
Off Timer
Slider to adjust the timeout, how fast the display/key illumination is turned off.
Bluetooth
State
Off, Connect to Mobile/PC
Mode
Local, Public
Volume
Slider to adjust the bluetooth volume.
Dimming
Slider to adjust the Dim level.
Audio Settings
Headset Echo Cancellation
Switch to enable the echo cancellation.
Limits
Headset Lower Limit
Slider to adjust the minimum headset volume.
Speaker Lower Limit
Slider to adjust the minimum speaker volume.
3.4.3.2 Menu
Clicking the symbol shows a menu with the following options. The dialog can be closed by pressing the ESC key or
by clicking on another region in the window.
Change Profile
Allows changing the assigned Profile of the selected Beltpack.
Swap Configs
Allows swapping the Beltpack configuration of two selected Beltpacks.
Deregister
Allows removing a Beltpack from a Net.
Locate
Allows identifying the selected Beltpack visually. The Status-LED and the Status-Bar of the respective Beltpacks will
start flashing yellow until any key is pressed on the Beltpack.
Clear Selected User IDs
Removes the User IDs of the selected Beltpacks. The User ID is set to zero ("0").
Auto-assign User IDs
Assigns the User IDs of the selected Beltpacks automatically. The initial value is one ("1").
Registration Mode
Enabling the Registration Mode of the Net (see chapter 'Bolero Antenna > Web Interface > Net/Antenna > Menu –
Registration Mode').