Need help?Do you have a question about the Riedel Bolero 2.0 and is the answer not in the manual?
General| Brand | Riedel |
|---|---|
| Model | Bolero 2.0 |
| Category | Battery Charger |
| Language | English |
Precautions and warnings for handling and charging Bolero battery packs.
Steps to set up a Bolero-System in Standalone mode with IO devices.
Steps to access and configure the Antenna via its web interface.
Procedure for enabling registration mode and registering beltpacks to the network.
Creating device configurations and setting up audio channels for IO devices.
Programming individual beltpack keys and using profiles for configuration.
Steps to integrate a Bolero-System with an Artist-System.
Configuring the Artist system and verifying IP addresses for integration.
Creating a network space and managing beltpack registration within the Artist system.
Registering beltpacks and configuring their properties via the Artist software.
Adding existing antennas to a network space and assigning unique user IDs.
Step-by-step guide for updating firmware in Integrated/Artist and Standalone/Link modes.
Accessing the Firmware Manager, selecting and uploading firmware.
Initiating, confirming, and finalizing the firmware update process.
Steps to install licenses using the License Manager and confirming the installation.
Details on Power over Ethernet Plus and IGMP snooping for network traffic.
Explanation of beltpack key functions, talk modes, and navigation.
How to adjust master/channel volumes and use the Quick Mute feature.
Configuration options for headset volume, microphone gain, and audio limits.
Administering registration modes, PINs, and system time settings.
Accessing service functions like Walk-Test, reset options, and device information.
Registering beltpacks Over The Air (OTA) or via NFC on a registered Antenna.
Registering beltpacks using NFC contact points between beltpacks.
Using Walk-Test to analyze signal quality to visible antennas.
Resetting beltpack profiles or performing a factory reset.
Step-by-step guide for updating beltpack firmware using the charger and USB drive.
Detailed steps of the firmware update process for charger and beltpacks.
Detailed technical specifications for the Bolero beltpack.
How to open and access the antenna's web interface.
Steps for logging into and out of the antenna web interface.
Overview of the Net/Antenna window and its functions.
Functions for managing antennas and network spaces via the Action Button.
Managing antennas by removing, resetting, configuring registration, or rebooting.
Editing individual antenna settings such as name, IP, and PTP priority.
Functions for managing IO devices via the Action Button.
Defining unique IDs, types, names, and settings for IO device configurations.
Adding, assigning, removing, locating, and clearing IO devices.
Editing IO device configuration settings like triggers and audio channels.
Actions for managing beltpacks: change profile, swap configs, deregister, locate.
Managing beltpack registration and assigning user IDs.
Updating device firmware using the Firmware Manager.
Managing licenses, creating info files, and installing new licenses on devices.
To Next Page