RIEJU e-TANGO - Charging Issue Troubleshooting

…for everyday adventure
e-TANGO
15
Troubleshooting charging issues
Item
Charging status
Battery
voltage
Indicator
Status
Charging
current
1
Empty
load
Battery
Unconnected
Fast
charging indicator and Slow charging
indicator
flash
.
2
Charging
Press
the current switching button,
the
charging
current can be
switched
between
5A and 10A (when the
BMS
specifies
the charging current is
less
than
5A, press the current
switching
button
to be invalid).
A
total of 5 bar (20% -100%) capacity indicator,
the
corresponding
indicator that are
currently
charging
flash, the completed capacity
indicator
are
often on; when the current switch button
is
changed
, the fast charging or slow
charging
indicator
shows the corresponding 10A/5A status.
3
Battery
fully
charger
Fast
charging indicator and Slow charging
indicator
goes
off; All capacity indicators are often on.
4
Error indication
Battery
under voltage or short -circuit
(battery voltage
is lower than 44V)
The
20% and 40% battery capacity
indicator
flickering
faster.
Battery
overvoltage (battery voltage
is
higher
than 85V)
The
20% ,40% and 60% battery capacity
indicator
flickering
faster
Battery
anti -connection or
overheating
alarm
The
20% ,40% , 60% and 80% battery
capacity
indicator
flickering faster
Charger
fault (power supply
overvoltage,
overcurrent,
overheating)
The
20%,40% ,60% ,80% and 100% battery
capacity
indicator
flickering faster
DISPLAY AND CONTROL DEVICES