FRONT SUSPENSION
The front suspension consists of a hydraulic fork which has
been crafted to the highest standards of technology and
design.
Fork MRT / MRT SM 50
Ø 37 mm. fork tubes
Oil capacity: 245 c.c. per leg
Type oil recommended: SAE 15W/20
Fork MRT 50 PRO/SRT SM 50 PRO
Ø 40 mm. fork tubes
Oil capacity: 325 c.c. per leg
Type oil recommended: SAE 10W
REAR SUSPENSION
The rear suspension is made up of a rectangular-pipe swing arm anchored to a hydraulic mono-shock
absorber.
The MRT PRO / MRT SM PRO model is equipped with a gas-assisted hydraulic mono-shock absorber with
separate gas reservoir and spring preload adjustment via the nut located under the shock absorber spring
by means of the PRS progressive articulated rod system.
20
Threaded brass rings
MRT PRO/MRT SM PRO
To Next Page
Loading...
