EasyManua.ls Logo

RIEJU MRT 50 - Chain Cleaning and Lubrication Procedure

RIEJU MRT 50
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Try not to over tighten the chain, as it will stretch and wear the sprockets much quicker and may dama-
ge the gearbox.
If the wheel and chain are badly aligned, this can cause the chain to come off, and severely affect the
bikes handling.
Periodically, it is necessary to clean and grease the chain. The chain is made up of many pieces which
all work together. If the chain is not maintained properly, it will wear very quickly, therefore, it is advisa-
ble to grease the chain periodically with the correct chain lubricant.
Before lubrication, it is necessary to clean the chain to remove the dirt and the mud with a brush or a
cloth and then apply the chain lube to all the chain links and sprockets.
26
manual usuari mtr ang ok.qxp 06/03/2009 9:44 Página 26

Other manuals for RIEJU MRT 50

Related product manuals