Need help?Do you have a question about the Riello Family 30 KIS and is the answer not in the manual?
Covers essential safety rules, user obligations, and manufacturer liability.
Details mandatory maintenance and installation by qualified personnel.
Guidelines for the installation environment and clearances.
Instructions for boiler mounting and pipe connections.
Details on low-voltage electrical connections.
Safety precautions and requirements for mains power connection.
Proper procedures for gas supply connection.
Requirements for ventilation and exhaust systems.
Procedure for filling and venting the heating circuit.
Details on circulator settings, key lock, and bypass replacement.
Details on parameters like Outlet Over Rest Time, Freeze Protection, and Anti-Cycle.
Covers climate curves, building type, and ambient influence settings.
Essential checks before start-up and circulator shaft release.
Guide to setting basic boiler parameters.
Enabling and configuring thermoregulation with outdoor sensor.
Steps for initial start-up, mode selection, and vent cycle.
Procedures for resetting faults and using the screed heater.
Procedures for gas conversion and combustion analysis.
Detailed steps for performing flue gas analysis.
Interpreting error codes and fault messages on the display.
Comprehensive list of boiler error codes and their types.
Detailed list of combustion-related errors.
Procedures for resetting the boiler after a fault.
Description of the REC10 unit, its display, and button functions.
Explains system status icons, color bar, and display data.
To Next Page
General