Need help?Do you have a question about the Riello FAMILY KI and is the answer not in the manual?
Lists directives the boiler complies with, such as Gas Device and Efficiency Directives.
Details warranty start date, validation by service center, and contact information.
Covers checking integrity, qualified installation, proper use, and documentation.
Actions for water leaks and checking the pressure icon on the display.
Procedures for temporary switch-off, antifreeze function, and circulator antiblocking.
Recommends annual maintenance and proper disposal at end-of-life.
Explanation of the flue gas monitoring system and its safety function.
Actions to take if fuel smell is detected: ventilate, shut off fuel, contact service.
Avoid touching appliance while wet; disconnect power for cleaning.
Prohibits unauthorized modifications and manipulation of cables.
Importance of ventilation openings for combustion and avoiding outdoor use.
Covers flammable containers, child supervision, packaging disposal, and antifreeze.
Describes the FAMILY KI as a wall-hung gas boiler with open combustion.
Explains the purpose of keys like Info, Filling, Memory, and temperature adjustment.
Details the meaning of icons like RESET, Key, System filling, Memory, and Heating.
Explains icons for heating, flame, antifreeze, external probe, and remote control.
Steps for first start-up, including checks on fuel/water taps and operating conditions.
Verifying the cold hydraulic circuit pressure is between 1 and 1.5 bar.
Setting the desired room temperature via the ambient thermostat.
Adjusting temperature via encoder and selecting heating or DHW operation modes.
Describes safety stops, fault indications, and resetting procedures.
How to adjust outlet water temperature using the encoder.
How an external probe influences temperature and allows comfort level adjustments.
How to adjust the domestic hot water temperature using the encoder.
How to set the boiler for short absences, activating 'ENERGY FOR LIFE'.
Steps for shutting down the boiler for extended periods, including draining.
Provides hot water at a preferred temperature for showering, with personalization.
Activates DHW and heating intelligence to learn and adapt to user habits.
Stores domestic hot water usage habits to preheat water for anticipated demands.
Adjusts heating temperature based on firing time and ambient conditions for efficiency.
Allows quick, on-demand preheating of hot water outside usual habits.
Automatic procedure to restore system pressure when it drops below alarm level.
How to access and view operational information using the 'i' key.
How faults are indicated on the display with flashing codes and icons.
Describes the display behavior for temporary faults and safety stops.
Steps to reset the boiler after a fault, including scenarios for automatic or manual reset.
Lists temporary, resettable, and service faults with corresponding codes.
Details maintenance tasks for the 1st and 2nd year, including inspection and cleaning.
To Next Page
General