Riello Family Condens 2.5 - 3.5 KIS User Manual

Family Condens
2.5 - 3.5 KIS
2.5 - 3.5 IS
EN - INSTALLER AND USER MANUAL
PT - MANUAL DO USUÁRIO E DO INSTALADOR
DE - BEDIENUNGS- UND INSTALLATIONSANLEITUNG
SL - NAVODILA ZA VGRADITEV, PRIKLJUČITEV IN UPORABO
HR - PRIRUČNIK ZA INSTALATERE I KORISNIKE
F - MANUEL D’INSTALLATION ET D’UTILISATION
GR - ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΤΗ ΚΑΙ ΧΡΗΣΤΗ
RO - MANUAL DE INSTALARE SI UTILIZARE
SRB - UPUTSTVO ZA MONTAŽERA I KORISNIKA

Riello Family Condens 2.5 - 3.5 KIS Specifications

General

Brand	Riello
Model	Family Condens 2.5 - 3.5 KIS
Category	Boiler
Language	English

Summary

General Safety Devices

Installation Requirements and Mounting

Covers installation reminders, mounting instructions, and system cleaning procedures.

System Filling, Fumes Exhaustion, and Air Suction

Filling the Central Heating System

Provides instructions for filling the central heating system.

Bleeding Air from Heating System and Boiler

Step-by-step guide for removing air from the heating system and boiler.

Exhaustion Configuration Options

Lists approved fumes exhaustion configurations for the boiler.

Forced Open Installation (B23P-B53P)

Details installation for forced open configuration with Ø 80 mm duct.

Concentric and Twin Ducts Installation

Instructions for installing concentric (Ø80-125) and twin (Ø80) ducts.

Technical Data Overview

Central Heating (CH) Data

Technical data specific to Central Heating (CH) operation.

Domestic Hot Water (DHW) Data

Technical data specific to Domestic Hot Water (DHW) operation.

CH and DHW Operation Parameters

Specific technical parameters for CH and DHW operation.

Gas Pressure and Hydraulic Connections

Technical data related to gas pressure settings and hydraulic connections.

Technical Data and Multigas Table

Forced Open Installation and Emission Values

Multigas Data by Model

Multigas table data including parameters for each boiler model.

Start-Up and Operation Interface

Primary Control Interface Overview

Overview of the boiler's primary control interface and its buttons.

Start-Up and Operation Display Information

Secondary Information and Display Icons

Explanation of secondary information and display icons.

First Commissioning Procedures

Initial System Setup and Checks

Long-Term and Temporary Shutdown Procedures

Intelligent System Filling and Touch & Go

Display and Fault Codes

Faults and Resetting Procedures

Description of faults and steps for resetting them.

Fault Resolution Modes (Mode A, B, C)

Fault Icons and Specific Connection Faults

Explains fault icons and specific connection faults like J0 and J1.

Fault Description Table

A comprehensive table listing fault codes and their descriptions.

Parameters Programming

Parameter Programming Precautions

Setting Access and Modification Passwords

Modifying Parameter Values

Instructions on how to navigate and change parameter values.

Programmable Parameters Guide

Programmable Parameters Guide (Family Condens IS)

DHW and Heating Set-point Parameters

Thermoregulation and Memory Function Parameters

Special Function Parameters (Touch & Go, Antifreeze, Pump)

Setting the Thermoregulation

External Probe Connection Check

Thermoregulation Activation and Parameters

Setting Building Insulation Type

Choosing Climatic Compensation Curve

Adjustments and Calibration

Memory and H.T.C. Function Parameters

Calibration and Password Setting Procedures

Overview of calibration phases and setting programming/analysis passwords.

Calibration Phase Details

Fan Speed and Output Adjustment Procedures

Heating Output Adjustment (Max/Min)

Heating Maximum and Minimum Output Possibilities

Combustion Parameter Checking and Gas Conversion

Combustion Analysis Procedure and Precautions

Gas Conversion Process and Personnel Requirements

Regular Maintenance Checks and Safety Precautions

Boiler Operating Elements

Multi-Wire Diagram

Connecting Thermostat, Time Clock, and Special Systems

High Voltage Connections

Water Tank Sensor Connections

Low Voltage Connections

Special Systems (Pump & Separator)

Fumes Duct and Split Ducts Installation

Fumes Duct for Intake in Environments

Details on fumes duct installation for environmental intake.

Concentric Duct for Fumes Outlet/Air Intake

Instructions for concentric duct installation for fumes outlet and air intake.

Split Ducts for Fumes Outlet/Air Intake

Instructions for split duct installation for fumes outlet and air intake.

Range Rated Specification Fields

Heat Output and Fan Speed Rating Fields