Riello MultiCOM 392 - Page 13

- MST / MSM / MCT / MCM -
13
MultiCOM 392 must be inserted only in the UPS slot dedicated to the contacts boards: “AUX RELAY SLOT”.
▪ Remove the cover of the UPS slot dedicated to the contacts boards (AUX RELAY SLOT) by removing the two retaining
screws.
▪ Wire appropriately MultiCOM 392.
▪ Insert MultiCOM 392 in the slot dedicated to the contacts card (AUX RELAY SLOT).
▪ Fix the cover provided with the MultiCOM 392 using the screws previously removed.