Riello MultiCOM 392 - Configuration

- MPW / MPX -
32
CONFIGURATION
MultiCOM 392 can be configured using the configuration software of the MPW.
By default no function is associated to input/output and they have to be configured via the UPS configuration software.
Before setting the input/output, you must select “Multicom 392 [8out/4in]” for I/O card model.
For each input can be selected: the associated function (Input mode).
INPUT CONTACTS DEFAULT CONFIGURATION
INPUT
CONFIGURABLE
Configurator
Mode
IN 1
YES
Input 1 mode
NO OPERATION
IN 2
YES
Input 2 mode
NO OPERATION
IN 3
YES
Input 3 mode
NO OPERATION
SWMB
YES
Input 4 mode
NO OPERATION