- ENGLISH -
- 15 -
ENVIRONMENTAL SENSORS (OPTIONAL)
Is possibile to connect to NetMan plus the environmental sensors for monitoring temperature,
humidity and digital input/output.
The information provided by these sensors can be showed with the UPS monitoring and control
software or with a web browser (the HTTP service must be active).
The values provided by the sensors may also be requested with SNMP according to the RFC 3433
standard. The MIB file is inside the bundled CD.
Available sensors
Temperature: detects the environmental temperature in °C.
Humidity & Temperature: detects the relative humidity in % and the environmental
temperature in °C.
Digital I/O & Temperature: detects the environmental temperature in °C and features a
digital input and a digital output.
It is possible to connect up to 3 environmental sensor to a NetMan plus (for sensor
installation please see the sensors’ manual).
To Next Page
Loading...