- ENGLISH -
- 43 -
Configuration of several devices
If several devices requiring similar configuration parameters are to be installed, configure the first
card, connect via FTP with the admin user, download the configuration file, and upload them on all
devices to be configured via FTP.
Example of FTP connection for multiple installations
MONITORING WITH HTTP
The HTTP service uses TLS (transport layer security) in order to provide cryptographic security.
However, the certificate used is self-signed and therefore the web browser may prompt a security
alert.
Once the hostname or the NetMan plus IP address has been inserted in your web browser, the
following screen will be shown. From here is possible to view the status of the UPS and configure
the NetMan plus.
To Next Page
Loading...