To Next PageTo Next Page
Need help?Do you have a question about the Rietschle KLT 15 and is the answer not in the manual?
General| Brand | Rietschle |
|---|---|
| Model | KLT 15 |
| Category | Water Pump |
| Language | English |
Details pump components, filtration, vacuum/pressure regulating valves, and operating parameters.
Covers suitability for industrial use, operating limits, and temperature/humidity ranges.
Addresses hot surfaces, altitude impact, and general safety during operation.
Covers connection points, electrical data, motor connection, and safe installation practices.
Steps for initial pump operation, pipe connection, and setting pressure/vacuum ranges.
Details noise levels, hearing protection recommendations, and potential operating risks.
States bearings require no service; air filters need regular cleaning or exchange.
Procedures for checking blade wear and replacing them when minimum height is reached.
Addresses motor starter tripping due to voltage, settings, or filter/valve issues.
Covers issues like insufficient capacity or pump operating at high temperatures.
Identifies causes of abnormal noise such as worn cylinder or noisy regulating valves.
Provides guidance on site repairs, lifting, transport, and storage conditions.
Lists noise levels, weights, and dimensions for different KLT models.
