To Next PageTo Next Page
Need help?Do you have a question about the Rietschle KLT 25 and is the answer not in the manual?
General| Brand | Rietschle |
|---|---|
| Model | KLT 25 |
| Category | Water Pump |
| Language | English |
Details nominal capacities, pressure/vacuum limits, and data plate information for KLT models.
Explains pump connections, filters, motor-pump shaft, sound enclosure, and regulating valves.
Covers industrial use, temperature limits, humidity, and hazardous mixtures for pumps.
Advises on surface temperatures, required clearances, and horizontal installation.
Details connection types, electrical data, motor starters, and installation standards.
Guides on checking rotation direction, connecting pipes, and adjusting regulating valves.
Addresses noise emission levels and recommends hearing protection for personnel.
States that unit bearings are sealed and require no service.
Advises on cleaning or replacing filter cartridges for optimal pump performance.
Details blade inspection intervals and minimum height requirements for KLT models.
Lists common problems like motor starter trips, low capacity, and abnormal temperatures.
Advises on disconnecting power and consulting service agents for repairs.
Specifies using the eye bolt for lifting and transporting the units safely.
Advises dry storage and using closed containers for high humidity environments.
Mentions disposing of wearing parts according to health and safety regulations.
Lists document references for spare parts for different KLT model series.
