To Next PageTo Next Page
Need help?Do you have a question about the Rietschle Pico VLT 40 and is the answer not in the manual?
General| Brand | Rietschle |
|---|---|
| Model | Pico VLT 40 |
| Category | Water Pump |
| Language | English |
Details features like vacuum connection, exhaust silencer, and micro-fine filter.
Specifies industrial use, closed system evacuation, and permanent vacuum range.
Covers pump placement, required clearances, horizontal installation, and electrical connections.
Includes precautions for hot surfaces, temperature limits, noise, and electrical installation.
Check direction of rotation by briefly switching the pump on and off.
Connect suction pipe after initial start-up check; avoid long/small bore pipes.
Adjust vacuum level using the regulating valve (C) as per symbols.
VLT pumps have sealed, lifetime-greased bearings and require no lubrication.
Filter cartridges (e) require cleaning or replacement to maintain pump capacity.
Inspect blades for wear based on operating hours and replace if minimum height is reached.
Addresses issues like tripping, incorrect connections, or settings on the motor starter.
Covers blocked filters, long pipework, leaks, and worn/damaged blades.
Troubleshoots high operating temperatures due to ambient conditions or restricted cooling airflow.
Identifies causes of noise such as worn pump cylinders, noisy regulating valves, or damaged blades.
Guidelines for on-site repairs, including electrical disconnection and consulting service agents.
Instructions for lifting pumps, transport, and proper storage conditions.
Lists available spare parts and their corresponding pump models.
