Contact us at support@RIGDOO.tech
IMPORTANT INSTRUCTION
1)The HT-20 uses a standard SD card instead of a Micro SD card (TF class 10).
2)The HT-20 is compatible with SD cards up to 256GB.
3)Format the SD card when you find that the camera does not recognize the
memory card properly. Please ensure that the memory card is formatted
successfully, if it is successful the upper right hand corner will show the current
capacity for the duration of the recording. if not, the number shown in the upper
right corner will be 00:00:00.( Format memory card → YES → OK )
4)When you don't know what happened to HT-20, try to reset camera.
( MENU → Reset settings → YES → OK )
5)Camera must be turned off before inserting or taking out the SD card.
6)Don’t take out SD card or disconnect the camera from USB port while formatting
the SD card or transferring photo/video onto your computer, otherwise,
photo/video in the memory card will be lost, even corrupt the SD card.
7)HT-20 supports 6V/1.5A external power supplies. The size is 3.5mm x 1.35mm.
For your reference - use keyword “6v dc 3.5mmx1.35mm” to search items on
Amazon, look for which power adapter is the most suitable for you.
8)Please remove the battery to prevent damage to the battery or the camera when
you are using an external power supply.
9)Remove the battery from the camera when it will not be used for a long period of
time.
10)Do not dip the camera in the water.
11)The camera can work under 160°F but please keep the camera far enough from
fire.
12)Alkaline batteries are strongly recommended because alkaline batteries were
able to provide stable power to the camera.
13)Do not use dead batteries together with fresh batteries.
To Next Page
Loading...