Need help?Do you have a question about the RigExpert AA-55 ZOOM and is the answer not in the manual?
General| Frequency Entry Resolution | 1 Hz |
|---|---|
| Interface | USB |
| Measurement Parameters | R, X, Z, SWR, Return Loss |
| Display | LCD, 128 x 64 pixels |
| Power Supply | Li-Ion battery |
| Operating Temperature | -10 to +50 °C |
Connect the analyzer, launch AntScope2, and perform initial frequency scans for measurements.
View detailed measurement parameters like SWR, Z, and cable length displayed when hovering over the graph.
Save current measurements to .asd files and load them for comparison, or export data to other formats.
Capture and save AntScope2 window screenshots or print graph data for documentation and sharing.
Take direct screenshots from the analyzer to the clipboard for easy transfer and saving.
Retrieve previously saved measurement graphs from the analyzer's internal memory slots.
Add, view, and remove markers on the graph to identify specific data points and their values.
Utilize TDR mode to analyze cable integrity by viewing impulse and step response graphs.
Perform Open-Short-Load (OSL) calibration to enhance measurement accuracy, especially for cable measurements.
Save and recall custom frequency ranges and zoom settings as presets for quick access.
Connect the analyzer to a Windows PC wirelessly via Bluetooth, identifying the assigned COM port.
Install and use the Antscope mobile app for Android to connect and operate the analyzer wirelessly.
To Next Page
