Need help?Do you have a question about the RigExpert AA-650 ZOOM and is the answer not in the manual?
General| Brand | RigExpert |
|---|---|
| Model | AA-650 ZOOM |
| Category | Measuring Instruments |
| Language | English |
Summarizes the analyzer's functions and tasks it can perform.
Covers initial setup, powering on, and basic menu navigation.
Explains the use of keys and how to connect an antenna.
Details the SWR chart display and zooming capabilities.
Describes displaying parameters and setting frequencies.
Explains the R,X and Smith chart measurement modes.
Covers saving/loading data and single-frequency SWR.
Explains how to view all measured parameters on one screen.
Describes the mode for tuning multi-band antennas.
Discusses checking and tuning antennas for optimal performance.
Covers concepts like open/short-circuited cables and resonance.
Details the process of measuring physical cable length.
Explains how to determine a cable's velocity factor.
Describes methods for identifying faults in cables.
Provides instructions for constructing coaxial stubs.
Guides on measuring coaxial cable impedance.
Covers measuring capacitors, inductors, transformers, and traps.
Explains how to check RF transformers using the analyzer.
Describes how to measure the resonant frequency of traps.
Explains the stub tuner mode for making or checking stubs.
Describes tools for measuring cable length and velocity factor.
Details the procedure for measuring cable loss.
Guides on measuring cable impedance using the analyzer.
Explains how to run diagnostic tests on the analyzer.
Explains the fundamentals of Time Domain Reflectometry.
Details how to interpret impulse and step response charts.
Illustrates various fault conditions using TDR charts.
Guides on performing TDR measurements and managing results.
To Next Page
