Need help?Do you have a question about the RigExpert AA-54 and is the answer not in the manual?
General| Frequency Range | 0.1 to 54 MHz |
|---|---|
| Frequency Entry Resolution | 1 Hz |
| Measurement for 50 and 75-Ohm systems | Yes |
| Display Type | LCD |
| Output Connector | BNC |
| Measurement Type | SWR, R, X, Z, Return Loss |
| SWR Display | Graphical and numerical |
| R and X Range (Numerical Mode) | 0 to 1000 Ohm |
| Measurement Accuracy | ±5% |
| Power Supply | USB rechargeable battery |
| Power Charging | USB |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
Overview of measurement modes based on single or multiple frequencies.
Details on displaying and measuring SWR at a single frequency.
Visualizing measurement parameters graphically over a frequency range.
Plotting SWR values over a specified frequency range.
Plotting the resistive (R) and reactive (X) components of impedance.
Accessing and configuring various device settings and test modes.
How to use the analyzer for checking and adjusting antennas.
Using SWR graph mode to check antenna performance before connecting equipment.
To Next Page
