4
2. Specifications
Frequency range: AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz
Frequency entry: 1 kHz resolution
SWR measurement range: 1 to 10
SWR measurement for 50 and 75-Ohm systems
SWR display: numerical or easily-readable bar
R and X range: 0…1000, -1000…1000 in numerical mode,
0…200, -200…200 in graph mode
Display modes:
- SWR at single or multiple (AA-54 only) frequencies
- SWR, R, X, Z, L, C at single frequency
- SWR graph, 100 points
- R, X graph, 100 points
RF output:
- Connector type: UHF (SO-239)
- Output signal shape: rectangular, 0.1…10 MHz (AA-30) or
0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-
54) harmonics are used.
- Output power: about + 13 dBm (at 50 Ohm load)
Power:
- Two 1.5V, alcaline batteries, type AA *
- Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
- Max. 3 hours of continuous measurement, max. 2 days in stand-by
mode when fully charged batteries are used
- When the analyzer is connected to a PC or a DC adapter with USB
socket, it takes power from these sources
Interface:
- 128x64 graphical backlit LCD
- 6x3 keys on the water-proof keypad
- AA-54: multilingual menus and help screens, AA-30: menus and
help screens in English language
- USB connection to a personal computer
Dimensions: 22·10·3.6 cm (9·4·1.5”);
Operating temperature: 0…40 °C (32…104 °F)
Weight (including batteries): 400g (14 Oz)
Batteries are not included with the analyzer. Users can purchase these batteries with
a corresponding charging adapter.
To Next Page
Loading...
