RIGO Lamibind 2000 EVA - Page 2

2
Specifications
Type of the machine
Lamibind 2000 EVA
Dimensions of the machine (l x w x h mm) with stand
(l x w x h inch) with stand
1442 x 750 x 1260
56,8” x 29,5” x 49,6”
Dimensions of the packaging (l x w x h mm)
(l x w x h inch)
1690 x 1010 x 1570
66,5” x 39,7” x 61,8”
Net weight (kg/lbs)
250 / 551
Gross weight (kg/lbs)
300 / 661
Mono phase power supply
230 V-50 Hz
Nominal current (A)
12
Capacity (kW)
Capacity (kW) including dust collector
2,5
3
Length of the document (mm/inch)
100-340 / 3,9”-13,4”
Thickness of the document (mm/inch)
1-40 / 0,03”-1,4”
Theoretical number of working cycles (fwd-bwd/hours)
290
Binding
Motorized
Closing of the clamp - vice
Motorized
Start of the binding process after closing of the vice
Automatic
Binding counter (job counter/life counter)
YES
Working of the spine of the document
with milling and slitting
YES
Gluing unit
EVA Hot-melt
tank (liter/gallon)
0,75 / 0,19
Heat-up time (minute)
depending on the glue type used in the machine
40 - 45
Temperature range of the melting of the glue (
0
C/
0
F)
140-200 / 284-392
Adjustment of the glue temperature
By touch screen
Display of the glue temperature
Numerical
Application of the glue
By roller
Side gluing
YES
Adjustment of the glue thickness
Manual
Working safety equipment
Display of the ready state
READY
Error code indication
YES
Emergency stop button
YES
Binding cycle forbidden
- without document
YES
- if the glue container’s protection is opened
YES
Accessories
EU power supply cable
YES
Record of the first starting and sample document
YES
Instruction manual
YES
Paper dust collector
YES