22
4.5 Hot-melt glue tank
This unit is responsible to provide the book with the requested amount of glue. The
glue tank is designed to have 2 different glue containers to provide the possibility of
using 2 different kind of glue (for spine gluing and for side gluing).
1. The first tank is responsible to provide the required quantity on the spine of the
book.
2. The second tank is responsible to provide the side of the books with glue.
The advantage of this type of glue tank is: to use 2 different kind of glue at the same
time, which increases the quality of the bounded book.
To Next Page
Loading...