RIGO Lamibind 2000 EVA - START Menu Parameter Adjustments

30
1.1.2. SERVICE menu
(This section can be found in the Service Manual.)
1.2. Description of the START menu:
1. Adjustment of the heating zone
2. Adjustment of the binding time
3. Adjustment of the opening distance
4. Switching ON and OFF the Milling system
5. Book cycle/job counter
6. Change binding mode
7. Information when the machine is ready to use.
8. Cover sensor switch on/off
9. Book block positioning
10. Auto mode on/off
11. Glue cut-off adjustment
1
2
3
4
5
6
7
8
9
10
11