RIGOL Chapter 2 Front Panel Operations
2-110 DG1000Z User’s Guide
Rear Panel:
Do not use any other adapters to supply power for PA1011, or else it may
cause degradation or perpetual damage.
CAUTION
Please make sure the vents at both sides and the fan aperture at the rear
panel are visible in operation for normal working.
PA1011 Accessories:
Connect the AC into the power adaptor.
AC Adaptor 1 Output 12V, 4A signal.
USB Cable 1 Connect PA1011 with DG1000Z.
BNC Cable 1 Connect PA1011 with DG1000Z.
Provide the PC software installation program of PA1011.
USB Device Power In Fan Aperture
To Next Page
Loading...
