Rigol DG812 - Page 42

RIGOL Appendix
DG800 Performance Verification Guide
10
Accuracy
Typical (1 kHz sine, 0 V offset, >10 mVpp, auto)
±(1% of the setting value) ± 5 mV
Flatness
Typical (Sine, 1 Vpp)
≤5 MHz: ±0.1 dB
≤15 MHz: ±0.2 dB
≤25 MHz: ±0.3 dB
≤35MHz: ±0.5 dB
Unit
Vpp, Vrms, dBm
Resolution
0.1 mVpp or 4 digits
Offset (into 50 Ω)
Range (Peak
ac+dc)
±5 Vpk ac+dc
Accuracy
±(1% of the setting value + 5 mV + 1% of the amplitude)
Waveform Output
Output Impedance
50 Ω (typical)
Protection
Short-circuit protection, automatically disable the waveform output when
overload occurs
Modulation Characteristics
Modulation Type
AM, FM, PM, ASK, FSK, PSK, PWM
AM
Carrier Waveform
Sine, Square, Ramp, Arb
Source
Internal/External
Modulating
Waveform
Sine, Square, Ramp, Noise, Arb
Modulation Depth
0% to 120%
Modulation
Frequency
2 mHz to 1 MHz
FM
Carrier Waveform
Sine, Square, Ramp, Arb
Source
Internal/External
Modulating
Waveform
Sine, Square, Ramp, Noise, Arb
Modulation
Frequency
2 mHz to 1 MHz
PM
Carrier Waveform
Sine, Square, Ramp, Arb
Source
Internal/External
Modulating
Waveform
Sine, Square, Ramp, Noise, Arb
Phase Deviation
0° to 360°
Modulation
Frequency
2 mHz to 1 MHz
ASK
Carrier Waveform
Sine, Square, Ramp, Arb
Source
Internal/External
Modulating
Waveform
Square with 50% duty cycle
Key Frequency
2 mHz to 1 MHz
FSK
Carrier Waveform
Sine, Square, Ramp, Arb
Source
Internal/External