Chapter 1 Test Overview RIGOL
DL3000 Performance Verification Manual
5. Keep the cables of the test probe as short as possible.
CAUTION
The tests described in this manual are required to be carried out by the
professionals. During the test, dangerous voltages might be present on
the output terminals of the power supply and some test devices.
Recommended Test Devices
You are recommended to use the devices listed in Table 1-2 or other devices whose
performance specifications meet the "Performance Requirement" listed in Table 1-2.
Table 1-2 Recommended Test Devices
DSP-150-005HD
DSP-008-090HD
Provides voltage
and current
Current
Sampling
Resistor R
M
0.01 Ω (temperature drift: 1
ppm)
Measures
programming
accuracy and
readback accuracy
Realizes remote
control, measures
programming
accuracy and
readback accuracy
To Next Page
Loading...
