Rigol DL3032

RIGOL Chapter 2 Front Panel Operations
2-72 DL3000 User’s Guide
5. View waveform display
Press the waveform display key
to enter the waveform display interface,
as shown in Figure 2-42. For detailed operations, refer to the descriptions in
"Waveform Display Function" section. Press the waveform display key
again to exit the waveform display interface and return to the main interface
of CC+CV function.
Figure 2-42 CC+CV Waveform Display Interface
6. Exit CC+CV mode
Press any key on the front panel of the load to exit CC+CV mode.