Rigol DP800 Series Manual

Page 5
6) Once the test is completed, press (…), and disable the Recorder. As soon as
it is disabled, the Record mode will ask if you wish to save the data. Press
OK to save.
7) In this experiment, I had the following static output values for the duration
of the test:
CH1V = 2.00V CH1A = 0.02A
CH2V = 2.08V CH2A = 0.18A
CH3V = 1.50V CH3A = 0.33A

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English